| March 2008 | HomeCompanyApplicationsServicesProjectsNewsContact |
|
Get the Help You Need
To discuss your next CMC Project contact Seth Pearlman, President, DGI-Menard or Jason Griffin, Project Engineer, DGI-Menard |
Highway 2000, Kingston, Jamaica
Freyssinet Group companies DGI-Menard and Menard of France joined forces to install Controlled Modulus Columns (CMC)
and Prefabricated Vertical Drains (Wick Drains) for the support of a highway embankment constructed over a mangrove swamp on the
island of Jamaica. To meet the tight schedule, the two companies simultaneously installed 1.5 million meters of Prefabricated Vertical
Drains (Wick Drains) and 135,000 meters of CMCs.
Frederic Masse, Vice President of Engineering |
|
Please take a moment to tell us what you think of The Column. Email your suggestions and
general feedback here.
Visit our website at www.dgi-menard.com Call us at 412-257-2750 Send this eNewsletter to a colleague. |
Frederic Masse, Vice President of Engineering and a native of France, joined DGI-Menard following the merger of DGI and Menard Soiltreatment, Inc., the US affiliate of Menard, one of the world's leading specialized ground improvement contractors. Before the merger, Frederic was with Menard and its subsidiaries for eight years. His last position was as the executive vice president of Sangjee Menard Co. Ltd. in South Korea and Far East regional manager for Menard. Because of his worldwide experience, Frederic is one of DGI-Menard's greatest assets in working on international projects, like Highway 2000 in Jamaica. With an MS in Civil Engineering and Soil Mechanics, Frederic has extensive experience in technical research on new technologies for soil improvement. At DGI-Menard he manages the engineering and design on all major ground improvement projects. >Contact Frederic to discuss your ground improvement projects>Read Frederic's online bio
Support of MSE Walls and Reinforced Embankments Using Ground Improvement This paper, written jointly by DGI-Menard and The Reinforced Earth Company and recently presented in Japan by Roger Bloomfield, president of The Reinforced Earth Company, discusses the use of Controlled Modulus Columns (CMC) as an ideal solution for the support of MSE walls, steepened slopes and conventional embankments.
|
©2008 DGI-Menard Inc., All Rights Reserved • The Column design: The Karol Company